Ruggedized Variable High Power High Voltage Power Supply
Get Latest PricePayment Type: | T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 1 Piece/Pieces |
Transportation: | Ocean,Land,Air,Express |
Port: | SHANGHAI,NANJING,QINGDAO |
Payment Type: | T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 1 Piece/Pieces |
Transportation: | Ocean,Land,Air,Express |
Port: | SHANGHAI,NANJING,QINGDAO |
Model No.: HP
Brand: IDEALTEKNIC
Place Of Origin: China
Input Voltage: Three Phase 380vac
Input Frequency: 50/60hz
Working Principle: Pwm
Power Supply Type: Igbt-Based
Working Mode: Constant Voltage / Constant Current
Display Mode: Digital Led
Control Mode: 10-Turn Potentometers
Protections: Ovp, Ocp, Otp, Short Circuit And Load Discharing Protections.
Applications: Capacitor Charging, Experiment, Electro-Gun, Electrostatic, Ion Injection
Cooling: Forced Air Cooling
Selling Units | : | Piece/Pieces |
Package Type | : | Plywood case |
Picture Example | : | |
Download | : |
HP Series High Power High Voltage Power Supply
Overview
HP series High Voltage Power Supplies are the first-generation High Power High-voltage Power Supplies product designed by iDealTek-Electronics.
It adopts standard 19-inch chassis structure to facilitate the integration and installation of high-power high-voltage systems. The single-unit power ranges from 5kW to 15kW with the high voltage output range from 1KV to 60kV.
The high-power inverter used in the HP series High Power High Voltage Power Supplies adopts the series resonant inverter independently designed by iDealTek. The input terminal adopts an ultra-low loss filter capacitor and is directly installed on the top of the power module. The input rectification, filtering, and inverter are all integrated on the heat sink. According to the voltage level and power level, it is decided to use air cooling or water cooling or oil plus water cooling mode to ensure good heat dissipation of the power supply. The high-voltage transformer uses a distributed rectifier transformer. These two characteristics determine that this series of High-Power High Voltage Power Supplies have very high reliability and very low energy storage.
The output voltage and current of the high voltage Power Supplies can be controlled and read through the front panel of the power supply. And, this series of High-Power HV Power Supplies are equipped with a DB25 interface as standard. Customers can edit the control software according to our communication protocol or apply 0 - 10V signal and dry contact signal on the interface according to our interface definition to achieve control and monitoring of the power supply, such as high voltage start/stop, output settings and readings.
Features
l Professional high voltage power supply with continuous HV output ability.
l Output voltage: 1KV / 2KV / 5KV / 10KV / 20KV / 30KV / 40KV / 50KV / 60KV available.
l Output power: 5KW / 10KW / 15KW available.
l Output voltage & current both 0 ~ 100% rated value continuously adjustable.
l CV & CC working modes.
l Max. charging/discharging repetition frequency: 50Hz
l Charging/discharging repetition accuracy: <2% (@50Hz)
l Forced air cooling / Oil-immersed cooling with rugged design.
Safety Cautions
1. This power module has HV output, only professional person could operate it.
2. Please make sure of good grounding before operation.
3. Capacitor charging power supply has low internal stored energy, please NO no-loading working.
4. Keep power module clean and good ventilation.
5. HV input & output connectors or HV load no touch anything.
Working principle |
The IGBT full bridge inverter and the Series Resonant Tank circuit are the key components in this power supply. The series resonant inverter converts input voltage source to a equivalent current source, each pulsing is equivalent to an energy pack, which is sent to output load or output filtering capacitor after HV rectifying. Different output voltage and current corresponds to different output pulsing frequency, adjusting pulsing frequency leads to output voltage and current changes. |
Functional parts |
The HP unit is made up of four different functional parts as shown below: |
|
l Rectifier Part This stage takes three-phase 380Vac or 440Vac input, then after rectifies and filters, it creates a 600Vdc pulsing DC output.
l High Frequency DC/AC Part This stage uses an IGBT (Insulated Gate Bipolar Transistor) full bridge circuit to convert the pulsing DC to a high frequency AC waveform that feeds the next stage.
l Series Resonant Tank Part This part is an inductor in series with a capacitor. This LC network defines the characteristic impedance of the system and the frequency at which the AC current resonant.
l High Voltage AC/DC Part This part uses a transformer to step up the high frequency AC the necessary high voltage level. A rectifier circuit is then used to convert the high voltage, high frequency AC to the high voltage DC. |
Input |
Voltage |
Three-phase 380Vac (input tolerance: 10%) |
|
Frequency |
50Hz/60Hz |
||
Current |
As per output power. |
||
Output |
Rated power |
**KW (Max.) |
|
Output voltage adjusting range |
0 ~ **KV |
||
Output current adjusting range |
0A ~ *****mA |
||
Output polarity |
Positive or Negative (both available) Client must choose one output polarity before ordering. |
||
Line regulation |
≤0.1% for ±10% change in input voltage. |
||
Load regulation |
≤0.1% for no load to full load at output. |
||
Output connection |
HV connector and line provided by IdealTek. |
||
Power factor |
≥0.92 |
||
Efficiency |
≥90% (measured @ 80% ~ 100% resistive load) |
||
Setting & Display |
Output control mode |
Local |
10-turn potentiometer on front panel. |
Remote |
DB25 analog port & RS485 communication port. |
||
Display mode |
Display mode |
41/2 LED digital display |
|
Display resolution |
≤1% (range: 5%~100% of the rated value) |
||
Protection & Monitoring functions |
Input protection |
Input lack voltage and lack phase protection. |
|
Output over voltage protection (OVP) |
Power supply automatically cuts off output and alarms when output has over voltage. |
||
Over temperature protection (OTP) |
Power supply automatically cuts off output and alarms when the internal temperature of the power supply exceeds its threshold value. |
||
Load discharging protection |
When the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated. |
||
Short circuit protection |
When a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage. |
||
Over current protection |
When the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases. |
||
Noise |
≤65 ~ 70dB |
||
Protection degree |
IP20 |
||
Cooling method |
Forced air cooling / Oil-immersed cooling. |
||
Working environment conditions |
Ambient temperature |
-10℃~40℃ |
|
Humidity |
10%~90%(non-condensing) |
||
Height |
≤2000m |
||
Storage environment conditions |
Ambient temperature |
-20℃~60℃ |
|
Humidity |
10%~90%(non-condensing) |
||
Height |
≤4000m |
||
Size (W*H*D) (mm) |
19-inch 9 ~ 10U cabinet with 800mm Depth |
||
Weight |
Approx. 95 ~ 120Kg (depends on power rating) |
||
|
KV |
mA |
P (KW) |
Model |
KV |
mA |
P (KW) |
Model |
5 |
2000 |
10 |
HP-(N/P)10KW-5KV |
5 |
3000 |
15 |
HP-(N/P)15KW-5KV |
10 |
1000 |
10 |
HP-(N/P)10KW-10KV |
10 |
1500 |
15 |
HP-(N/P)15KW-10KV |
20 |
500 |
10 |
HP-(N/P)10KW-20KV |
20 |
750 |
15 |
HP-(N/P)15KW-20KV |
30 |
333 |
10 |
HP-(N/P)10KW-30KV |
30 |
500 |
15 |
HP-(N/P)15KW-30KV |
40 |
250 |
10 |
HP-(N/P)10KW-40KV |
40 |
375 |
15 |
HP-(N/P)15KW-40KV |
50 |
200 |
10 |
HP-(N/P)10KW-50KV |
50 |
300 |
15 |
HP-(N/P)15KW-50KV |
60 |
167 |
10 |
HP-(N/P)10KW-60KV |
60 |
250 |
15 |
HP-(N/P)15KW-60KV |
|
l 0 ~ 10V analog signal control (DB25 interface) (+AC)
l RS communication interface (RS232 / RS485 optional) (+RC)
19-inch 9 ~ 10U cabinet (RAL7035) |
|
|
Reference photos |
|
|
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.