50W High Voltage Air Purification Power Module
Get Latest PricePayment Type: | T/T,Money Gram,Western Union |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 100 Piece/Pieces |
Transportation: | Ocean,Land,Air |
Port: | SHANGHAI,NANJING,QINGDAO |
Payment Type: | T/T,Money Gram,Western Union |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 100 Piece/Pieces |
Transportation: | Ocean,Land,Air |
Port: | SHANGHAI,NANJING,QINGDAO |
Model No.: AP01
Brand: IDEALTEKNIC
Output Type: Single
Warranty: 1 Year
Output Power: 0 ~ 50 W
Input Voltage: Full Range
Connection Mode: Parallel Switching Power Supply
Starting Mode: Self-excited Switching Power Supply
Voltage Regulating Mode: Width Modulation Type
Power Supplying System: Terminal Power Distribution Equipment
Energy Transmission: One-way Transmission
Modulation System: PFM
Circuit Mode: PFM
Working Mode: Constant Voltage
Applications: Air Purification
Protections: Over Load / Discharging Protection
Output Voltage Range: 2 ~ 12 KV
Selling Units | : | Piece/Pieces |
Package Type | : | Plywood case |
AP01 Series High Voltage Power Module
Overview
AP01A series High Voltage Power Module is specially designed by iDealTek for air & oil fume purification, it is featured for its high reliability, performance to price ratio.
AP01A has cleanliness degree monitoring function for oil fume cleaner to prevent cleaner from burning out, also its output voltage potentiometer and working indicators are located besides input terminals for convenient use, and high voltage main board circuit uses SMT processing for good quality and reliability.
Output power: 0 ~ 50W
Two output types: single-output type and dual-output type
Single-output type voltage range: 2KV, 4KV, 7KV, 8KV, 10KV, 12KV etc.
Features
l Two input range for selection: 110Vac / 220Vac
l High efficiency and reliable inverter design.
l Output voltage no changes with no-load working
l Discharging protection function.
l Over load protection.
l Automatic protected within a certain amount of discharging.
l Output voltage continuously adjustable.
l Input & Output connectors for convenient use.
l Working indicator light.
l Prevent cleaner from creeping discharging.
Specifications
Input | Typical value | Unit | ||||||||
Voltage | 115 (105 ~ 125Vac) | 220 (200 ~ 240Vac) | Vac | |||||||
Current | < 400 @ 220Vac | mA | ||||||||
Output | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
|
| KV |
Range | 6 | 6-7 | 6-8 | 7-9 | 8-10 | 9-11 | 10-12 |
|
| KV |
Power | 0-50 | 0-50 | 0-50 | 0-50 | 0-50 | 0-50 | 0-50 |
|
| W |
Current | 8.33 | 7.14 | 6.25 | 5.55 | 5.00 | 4.54 | 4.16 |
|
| mA |
Features | ||||||||||
Line regulation | <0.1% | |||||||||
Load regulation | <0.1% | |||||||||
Temperature drift | <200ppm/℃ (working temperature<55℃) | |||||||||
Ripple voltage | <3% (@100% load) | |||||||||
Working temperature | 0℃ ~ 55℃ | |||||||||
Storage temperature | - 20℃ ~ 80℃ | |||||||||
Size | 220mm×85mm×40mm / 155mm*115mm*45mm | |||||||||
Weight | 0.6Kg |
Power Curve
Output Voltage & Current Curve
Physical Drawing
Product function detailed introduction
AP01 A - A (Automatic version)
1. The power supply enters protection state and decrease HV output to 0V after continuously discharging for 16 times, power supply would restart and enter normal working state after 30 seconds.
This function is used to detect whether the user's load is too dirty to remind the user to clean the load. Customer can decide to enable or disable this function.
2. When the user's load is too dirty, the load will have creeping discharging, and the power supply will automatically enter the protection state and restart until the load does not have a creeping discharging. This function protects the user load from creeping discharge.
AP01 A - B (Manual version)
1. The power supply enters protection state and decrease HV output to 0V after continuously discharging for 16 times, user needs to disconnect the 220V input and restart power supply after 2 minutes and have power supply entering normal working state.
This function is used to detect whether the user's load is too dirty to remind the user to clean the load. Customer can decide to enable or disable this function.
2. When the user's load is too dirty, the load will have creeping discharging, and the power supply will enter the protection state until the load does not have a creeping discharging, user needs to disconnect the 220V input and restart power supply after 2 minutes and have power supply entering normal working state. This function protects the user load from creeping discharge.
AP01 A - C (Normal version)
When the user's load is too dirty, the load will have creeping discharging, and the power supply will automatically enter the protection state and restart until the load does not have a creeping discharging. This function protects the user load from creeping discharge.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.